Monday, July 15, 2013

Playing with my Copics

My poor old Cricuts and Silhouette are gathering dust lately as I've been spending more time with my Copics.

Here's some cards that I've been working on.

They're actually quite similar in their layout. And there's a very good reason for that! I've been taking classes from an amazing young lady called Alyce Keegan. Not only does Alyce do the most amazing Copic work, she also creates the prettiest cards I have ever seen. I just love her style!

The first two cards below are the finished product from her classes. The other two are totally inspired by them.

Make sure you check out Alyce's blog - Kit & Clowder. You'll be blown away by her talent! If you aren't lucky enough to be able to attend Alyce's classes (and that would be most of you) you can purchase the class kits. They are currently $25 plus postage and include all the supplies needed to complete the card. And Alyce even ships internationally!

Here's my cards - hope you like them!

Tilly - by Saturated Canary.  
Considering the fact that my purple pen blobbed twice on my 
card I think she turned out pretty cute! 



Fancy Marci - by La-Land Crafts
Still not happy with her hair so I think I may have to re-do this one!



Greta - by Eclectic Images
This one was for my mum for her 80th birthday



Santa Marci - by La La Land Crafts





Stamps used


Friday, July 12, 2013

SILHOUETTE: Using digi stamps with Silhouette studio

I love using my Copics to colour in my stamped images. But what I don't like is fussy cutting around the edge.

Some time ago I wrote a tutorial on using stamped images with Silhouette Studio. Since then, from corresponding with Irina from La-La land stamps, I have learned that doing that is against the copyright of the image. For that reason I have removed that tutorial from my blog.

However, Irina did say that using a digital La-La Land image (that you have obtained legally) with the Silhouette is OK. (Check with the artist/seller of any other digital images to make sure.)

Thanks Irina for helping me through the copyright minefield. :)

So here's a new tutorial on how you can take a digital stamp image and "fussy cut" it using Silhouette Studio.

The digital image I'm using in this tutorial is Sweetheart Marci from La-La Land Crafts.

 
  • Open Silhouette Studio and click the Page Tools button

  • Select the size of the paper you are going to print your image on. 
I'm doing multiples of the image so I'm selecting A4. (That's our equivalent to the US Letter size).



If you only want one copy of the image you could change the Width and Height settings to 4:00" x 6:00" and use the photo drawer of your printer to print your image. (Just cut your cardstock down to 4" x 6".)




Or, if you're lucky enough to have a 12x12 printer you could select 12" x 12" from the Printer Settings box.

You'll see the screen change to reflect the printer size you have selected.


  • Select File, Merge.
  • Navigate to the location where you saved your digi file and from the 'Files of type' box select All Files and select your file. Press OK
The image will appear on the mat.



  • Use the Zoom button on the toolbar to get a better view of the image.





Now you're ready to trace the image.


  • Click the Trace button

  • Click the Select Trace Area button


  • Click down and drag your mouse around the image.

When you release the mouse the image will turn yellow.


  • Zoom in again so you can see the image clearly.
  • With image still selected un-check Hi Pass filter from the Trace settings window and move the Threshold bar up to 100%.



Your image should look a bit like this:

  • Start moving the Threshold bar back slightly until the outer edge of the image is nice and clean.
(If you've been using Silhouette Studio for a while you might use the trace settings differently. Do whatever works for you.)


  • Click the Trace Outer Edge button



The image will have a red border around the edge. (It's hard to see but it is there..)



Now we're ready to make the offset for the image. This is so we don't have to fussy cut it!

  • Click inside the stamped image and move it to the side. (Don't delete it as you'll need it later.)


  • Click the Offset Window button

  • Click on your red outline image and click Offset



A red line will appear around the image. The default Offset (shadow) is 0.250".



  • Use the Offset Distance number to change size of the offset. I generally use a size of 0.100". It really depends on how close to the image you like to cut. 
 To change the offset size you can either move the slider left or right; type a different size in the box or use the up/down arrows. As you change the size you will see the offset line around the image change size too.


  • When you're happy with the size press the Apply button or press Enter.
  • Select the original inside red shape, move it to the side (to make sure you've got the right shape) and delete it.


  • Select the black image and position it back inside the offset image. You now have your image and its shadow.


Next we'll duplicate the image. (If you only want to cut the image once you can skip this part.)
  • Zoom the mat out so you can see the whole page
  • Drag a box around the entire image so that both parts (the image and the offset) are selected.
  • Select Edit, Copy (or Ctrl C) to copy the image to the clipboard
  • Select Edit, Paste (or Ctrl V) to paste a copy of the image onto the mat.


  • Drag the pasted image to another spot on the mat



  • Use Ctrl V again to paste another image to the mat and move it to another vacant spot on the mat
  • Continue pasting the image to the mat. In my case I can fit 5 on the mat (maybe more if I rotated some of them.) If your image is smaller you'll obviously be able to fit more.





Setting up the Registration marks

  • Click on the Registration Marks Settings toolbar button


  • Check the Show Registration Marks box


The registration marks will appear on your mat.


If you need more room to fit your images you can reduce the position and size of the registration marks by changing the Reg Mark Margins settings and the Reg Mark Size settings. (As indicated in the picture above.) I moved all the sliders to the left as far as they would go.


If the registration marks cover any part of your images you will need to move those images away from the registration marks.




  • Save your file!

Your stamped image is now ready to print and cut.


Printing and cutting the images


(You might want to do a test cut using printer/scrap paper before using your good blending cardstock. Just don't stick it down on the mat too hard or you might find it hard to remove!)

  • Press the Send to Printer button


  • If you are using any size paper other than your usual default size change your preferences to that size.
  • Press Print
  • When your print out is finished press the Send to Silhouette button on the toolbar


  • As you've already printed your image press Click here to skip printing




  • Follow the instructions at the next screen regarding where to set the rollers and where to place your printout on the mat
  • Press the Load Cutting Mat button on your Silhouette
  • Press the Continue button on the Send to Silhouette screen



  • At the Cut Image screen select Detect Automatically.


The Mat will be loaded into the Silhouette and the registration marks will be detected.



  • Once that is completed press Change Settings if you need to change your paper type

  • When complete press the Cut button




When the Silhouette has finished cutting press the Enter button to unload your mat and admire your work!




You can save this file to use again and again. Just open the file and do the Print and Cut parts of the tutorial.

Happy colouring!








Monday, July 1, 2013

CRICUT - Full Cartridge listing

Here is the Full list of Cricut Cartridges (including Digital)

Part 2 (N - Z) http://thenon-craftycrafter.blogspot.com.au/2013/09/cricut-cartridge-list-september-2013.html

To print the list go all the way to the bottom of the above linked posts and you'll find a Print button. :)

As well as the cartridges listed there are also: 

32 Digital Holiday Cards cartridges
30 Digital Father's Day Cards
The Pumpkin Carvings cartridge has been broken up into 50 individual cutting files
The Autumn Celebrations cartridge has been broken up into 6 digital image sets
Locker Talk has been broken up into 5 digital image sets
Happy Hauntings has been broken up into 11 digital image sets
Stretch your Imagination has been broken up into 10 digital image sets
Christmas Cards (Seasonal) cartridge has been broken up into 10 individual cards
Animal Kingdom has been broken up into 9 digital image sets
10 of the images from Doodlecharms have been released as a digital image set
Fontopia has been broken up into 26 individual digital letters, plus Fontopia Monograms and Fontopia Crests & Cards
Cindy Loo has been broken up into 40 single images
Team Spirit has been broken up into 50 single images
Create a Critter has been broken up into 40 single images
Preserves has been broken up into 49 single images
Related Posts Plugin for WordPress, Blogger...